|
|
| |
 |
|
| |
ORIENTENE
FM 03 is designed to provide: |
|
| |
|
 |
Good
optical properties. |
|
|
Consistent
processability. |
|
|
High
strength properties. |
|
Complies
with U.S FDA 21 CFR 177. 1520 ( c) 1.1. and other
EC and UK food contact regulations |
|
| |
 |
PROPERTIES |
|
VALUE |
|
UNIT
|
|
TEST
METHOD |
 |
|
Melt
Flow ( 230 °C /2.16 Kg) |
|
3.0 |
|
g/10
min. |
|
ASTM
D-1238, ISO 1133 |
|
|
Density
@ 23 °C |
|
0.9050 |
|
g/cm |
3 |
|
ASTM
D-1505, ISO R 1183 |
|
|
Tensile
Strength @ Yield ( 50 mm/min.) |
|
32 |
|
MPa |
|
ASTM
D-638* ISO 527 |
|
|
Tensile
elongation @ Yield ( 50 mm/min.) |
|
9 |
|
% |
|
ASTM
D-638*, ISO 527 |
|
|
Flexural
modulus(1% Secant), at 1.3 mm/min. |
|
1400 |
|
MPa |
|
ASTM
D 709 A*,ISO 178 |
|
|
Notched
Izod impact @ 23 °C |
|
35 |
|
J/m |
|
ASTM
D 256A*, ISO 180 |
|
|
Heat
deflection temp. @455 KPa |
|
104
|
|
°C |
|
ASTM
D 648 ISO 75 |
|
 |
|
|
|
|
|
|
|
 |
|
|
| *ASTM
D638 Molded and tested in accordance with D4101 |
|
| |
Note: |
|
| |
|
|
The values given in this technical data sheet are
the results of tests carried out in accordance with
standard test procedures. They are given as indication
to enable customers to make the best use of our
products but must be considered as average values
provided without implying any undertaking on our
part.
|
|
|
Data
should not be used for specification work. |
|
|
|
