Home Contact us site map Feedback
OPC Profile Products Support & Services Careers Register
  Orientene Grades l FDA l Orientene Performance l Safety Data Sheet l Collected Grade

Go
  ORIENTENE is made by UNIPOL™ POLYPROPYLENE technology, which combines the production efficiency of gas phase fluidized bed reactors with the high activity
and stereo specificity of SHAC ® catalyst system.
More details
  OPC polypropylene Homopolymer products are classifed in to four major categories, which include eight different grades.
Raffia
Film
Fiber
Mold
 
Petra (The British accredited independent research and consulting center) for packaging and food contact materials tested OPC PP grades and issued an official statement on July 30, 2003 , announcing that the polypropylene grades produced by Oriental Petrochemicals Co.
  Polypropylene's strong element and lightweight is it's versatility for molded, extruded and films products. Lower density /less material in part. Better heat resistance. Good surface finish and gloss. Excellent stiffness. Polypropylene is tailored to most plastic applications. Simply it is Living Hinge.
 
Orientene should not be stored for a prolonged period nor exposed to direct sunlight and/or heating during storage. This is due to the fact that may adversely affect the properties of the product. It is recommended to be stored in dry conditions at a temperature below 50°C and protected from direct exposure to sun light or UV light. Improper storage can initiate degradation which will negatively affect the physical properties of the product and may result in odour generation and colour changes.
 
Orientene is supplied in polyethylene bags of 25 kg (net weight) each or laminated polypropylene jumbo bags of one ton each. The bags are palletized, stacked and wrapped with stretched film up to 1500 kg each (net weight). The product is transported either via trucks or exported in sea containers.
 
 
Under normal conditions Orientene does not present a toxic hazard through skin contact or inhalation. During processing, contact with molten polymer and inhalation of volatile fumes should be avoided.
 
Dust and fines from the product carry a risk of dust explosion. All equipment should be properly earthed. Inhalation of dust should be avoided as it may cause irritation of the respiratory system, proper ventilation is therefore required.
 
Orientene complies with all food grade regulations. Items made from this grade do not transmit taste nor odour to food which comes in contact with it.
 
Orientene is inflammable and combustible (Category 3) according to ISO 1210.
Navigate for the complete proprieties of OPC polypropylene grades.
Copyright © 2004 Oriental Petrochemical Company , Web Design & Development by Raya Software